Our Services
Confined Space Entry
Entering a confined space can be one of the most hazardous tasks undertaken if the proper safety procedures are not implemented correctly. This training will increase your knowledge of the hazards associated with entering confined spaces. Also, specific control techniques and the basic pre-entry procedures to safely perform work will be reviewed.
Authorised Gas Tester
The risk of incidents involving gas occurs across the international oil and gas industry, particularly when working in confined spaces. This course will give you a basic understanding of gas hazards and how these can be mitigated by testing and other control measures. The knowledge gained in this course will help you understand how, when and where to carry out the necessary gas tests prior to confined space entry activities.
H2S BNSP
PERMEN No. 20 of 2008 concerning Compulsory Enforcement of Indonesian National Work Competency Standards in the Field of Oil and Gas Business Activities. After participating in the training, participants are able to: Understand, understand and control the dangers of Hydrogen Sulfide toxic gas and be able to take the Special Technical Personnel Certification examination for Hydrogen Sulfide Toxic Gas Control Officers smoothly
First Aid Training
First Aid knowledge is invaluable for both you as an individual and for your community. It enables you to assist persons who become injured in the event of an accident or emergency situation until help arrives. First Aid skills can be applied in the home, the workplace or in public locations, therefore the more First Aid certified people there are in a community the safer that community becomes.
Basic Fire Fighting
To increase awareness and control of occupational health and safety, and fulfillment of the Decree of the Minister of Manpower of the Republic of Indonesia No. KEP-186 / MEN / 1999 concerning Fire Fighting Units in the workplace, management or employers must prevent, reduce, extinguish fires and fire prevention exercises in the workplace. Where this is the basis for the establishment of fire prevention units in the workplace is mandatory. This unit is responsible for conducting training and fire prevention drills on a regular basis.
H2S Safety Awareness Level II
The risk of H2S exposure exists in many industries, including, but not limited to oil and gas, pulp and paper, construction, and mining. In workplaces where the possibility of H2S exposure exists, ALL workers should have H2S Awareness training. Workers who are at risk of exposure to H2S and/or workers with rescue responsibilities also require H2S Alive and workplace-specific training.
External Services
Drilling Rig Support Services
PT. Pandu Pelita Utama, are pleased to announce a collaboration between ourselves and Drilling Rig Support. Here are the services offered:
The Drilling Rig
Upon completing this module, you will be able to identify all significant components of a:
– Drilling rig.
– Power Generation.
– Drawworks and Hoisting systems.
– Mud Circulating systems.
– Written Test.
Basic Drilling and workover operations
Upon completion of this module, you will be able to explain:
– Well Types.
– Drilling Principles.
– Workover principles.
– Written Test.
Basic drilling practices
On completion of this module, you will be able to:
– Describe the four primary kick-off methods
– Explain where and why each method is preferred
– Understand why we need SOP’S
– Written Test.
Bits
On completion of this module you will be able to:
– Understand the History of bits.
– Bits used in today’s operations.
– Bit Hydraulics.
– Written Test
Cementing
On completion of this module you will be able to, understand the two principal functions of the cementing process which are:
– To restrict fluid movement between the formations
– To bond and support the casing.
– Written Test.
Surface well control equipment
On completion of this module you will be able to:
– Identify all equipment used on a surface system.
– Understand what role it plays in killing a well.
– Understand personnel’s roles and responsibilities during a well control situation.
– Written Test.
Wellbore Geometry.
Upon completion of this module, you will understand the importance of maintaining a stable wellbore is of primary importance during the drilling and production of oil and gas wells. This includes:
– Wellbore Stability.
– Casing points.
– FIT.
– LOT.
– Lost circulation.
– Written Test.
Drilling Fluids
Upon completion of this module, you will understand why drilling fluids serve many functions which include:
– Controlling formation pressures.
– Removing cuttings from the wellbore.
– Sealing permeable formations encountered while drilling,
– Cooling and lubricating the bit,
– Transmitting hydraulic energy to downhole tools and the bit
– Maintaining wellbore stability
– Written Test
Directional Drilling
On completion of this module, you will be able to:
– Design a BHA for each well type
– Understand the principles of how steering tools work.
– Understand the principles of how MWD/LWD work.
– Understand why anti-collision studies are done
– Written Test
Well Control
Upon completion of this module you will be able to understand:
– The Fundamental principles of well control
– Primary well control.
– Secondary Well Control.
– Tertiary Well Control.
PTW, JSA Risk Assessment
Upon completion of this module, you will understand the following:
– The importance of a PTW system in our industry.
– Why we use a JSA and Risk Assessment to ensure the safety of all personnel and equipment on your rig
– Written Test
HSE Audits and Procedures
On completion of this module, you understand the following:
– PLANNING: Setting Policy and Formulating a Safety Plan.
– DOING: Delivering Safety Plan.
– CHECKING: Measuring Performance, i.e. monitoring.
– ACTING: Reviewing Performance and acting upon lessons learnt.
Stuck Pipe Prevention Geothermal wells
Upon completion of this module you understand some of the root causes and how to prevent the following from happening in the wellbore:
– Differential Sticking
– Mechanical Sticking
– Borehole instability
– Accumulation of drilled cuttings in the wellbore.
– Written Test.
Stuck Pipe Prevention Oil and gas wells.
Upon completion of this module you understand some of the root causes and how to prevent the following from happening in the wellbore:
– Differential Sticking
– Mechanical Sticking
– Borehole instability
– Accumulation of drilled cuttings in the wellbore.
– Written Test.
Well control test.
On completion of this module you will understand the following:
– The causes, detection, prevention and minimization of kicks
– Understand the concept of ‘U’-tube and how it applies to well control
– Be familiar with the Shut-in procedures
– Objectives
– Explain the function of various Well control equipment
– Understand Constant BHP well control and other methods of well control
– Written Test.
